Ultra Clean Technology Logo

Ultra Clean Technology

Manufacturing Engineer

Posted 3 Days Ago
Be an Early Applicant
In-Office
Manor, TX, USA
Junior
In-Office
Manor, TX, USA
Junior
Supports semiconductor capital equipment production builds by developing manufacturing documentation, work instructions, BOMs, and assembly workflows. Provides technical direction and training to production staff, coordinates build activities, inspects completed systems, supports quality and safety compliance, investigates issues, recommends corrective actions, and processes engineering change orders. The role also assists with cost estimates, capital projects, customer coordination, and process improvement in a high-technology, engineer-to-order manufacturing environment.
The summary above was generated by AI

Join UCT and be part of the fastest-growing sector in the world! We indirectly touch every semiconductor chip that goes into every smartphone, smart car, and device that uses artificial intelligence. This is a critical time for the semiconductor industry and for UCT - as technology evolves, we evolve with it. UCT is a diverse workplace where every talented employee is committed to continuous innovation, challenging the status quo and exceeding customer expectations. If you are a person with a relentless drive to succeed, a strong focus on quality with a passion for success – join us today!  

UCT is looking for a talented Manufacturing Engineer to join us in Austin, TX!

The Manufacturing Engineer will be responsible for assisting with supporting the production build of various systems on the manufacturing floor. Responsible for planning and conducting independent work requiring judgment in the evaluation, selection, application, and adaptation of Manufacturing techniques, procedures, and criteria. Devise new approaches to problems, prepare or modify drawings, specifications, calculations, charts, and graphs, and monitor work for compliance to applicable build and quality standards.

 Essential Duties and Responsibilities: 

  • Requires a broad knowledge of Manufacturing Practices, Assembly Prints, and Bill of Materials to be able to create Manufacturing ready documentation such as S.O.E.’s (Sequence of Events) and Assembly Process Workflow.
  • Provides technical direction and on-the-job training to production staff.
  • Plans, schedules, conducts, and coordinates the Manufacturing Engineer portion of the system build.
  • Prepares and/or modifies work instructions, BOM structures, and training curriculum.
  • Ensure proper interdisciplinary coordination and effective communication on projects.
  • Requires contact with Customers, vendor representatives. Attends and participates in Customer meetings.
  • Confers with engineers, technicians, customers, and others to discuss best practices in an effort to streamline build processes and procedures.
  • Inspects completed systems; partners with Manufacturing and Quality organizations to ensure conformance to design and equipment specifications and compliance with operational and safety standards.
  • Supports project production efforts to ensure projects are completed on time and within budget.
  • Investigating customer or internal issues determines the nature and extent of the problem and recommends corrective actions.
  • Assists in cost estimations and development of capital project programs for new equipment and major repairs.
  • Evaluates and process Engineering Change Orders.
  • Performs other duties as required.
  • Attendance is an essential duty of this position.

Other Duties 

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Knowledge, Skills and Abilities:  

  • Lean Manufacturing Principles, Six Sigma Greenbelt preferred.
  • Familiarity with semiconductor capital equipment.
  • Knowledge of electronic Work Instruction software is a plus (i.e., Sequence).
  • ERP System Software
  • Excellent computer skills in Microsoft Suite, emphasis in Excel.
  • Prior experience leading small teams to achieve project success.
  • Good interpersonal skills: ability to work alone or in a team environment.

Educational/Certification Requirement:

  • Bachelor of Science/ Bachelor of Arts degree in Engineering, Physical Sciences, Manufacturing, or related field preferred with 2 years of experience in related manufacturing/ production position; or
  • Associate of Arts (AA) in a technical field with more than 5 years of manufacturing experience.

Experience Requirement:

Work Experience:

  • 2+ years related experience in high-technology manufacturing, preferably in semiconductor capital equipment or related industry with a Bachelor of Science degree in the below noted fields of study. 
  • 5+ years related experience in high-technology manufacturing, preferably in semiconductor capital equipment or related industry with an Associate of Arts in a technical field.
  • Working knowledge of quick-turn, engineer-to-order environment

Physical Demands and Working Conditions:

Work Environment: 

  • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
  • Works in a manufacturing, clean room, and/or office environment.

Physical Demands: 

  • Ability to kneel, reach, walk, push, pull and grasp.
  • Ability to lift up to 50 lbs. 
  • Ability to move arms, hands, and fingers.
  • Ability to sit for sustained periods.
  • Required to wear personal protective equipment.
  • Prolonged sitting with some standing and bending intermittently during work hours.
  • Subject to interruptions

Environmental Exposure: 

  • Required to wear personal protective equipment where applicable.
  • Subject to frequent interruptions.
  • The ability to talk on the phone and use a computer for extended periods may be required.
  • May involve exposure to moderate noise levels from printers, faxes, computers, etc.

Ultra Clean Technology is proud to be an equal-opportunity employer. We are committed to equal employment opportunity regardless of race, color, national or ethnic origin, age, religion, disability, sexual orientation, gender, gender identity and expression, marital status, and any other characteristic protected under laws and regulations.

Equal Opportunity Employer
This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Similar Jobs

2 Days Ago
In-Office
143K-214K Annually
Senior level
143K-214K Annually
Senior level
Aerospace • Artificial Intelligence • Machine Learning • Robotics • Software • Defense Technology
Leads manufacturing strategy and planning for autonomous aircraft and defense programs from proposal through execution. Develops cost, labor, capacity, staffing, tooling, facility, production-rate, and schedule models; evaluates manufacturing processes, automation, make-versus-buy decisions, factory flows, and surge capacity. Integrates cross-functional inputs into industrial plans, customer proposals, risk assessments, and readiness baselines, then transitions awarded programs into execution.
Top Skills: Autonomous Aircraft SystemsDiscrete-Event SimulationExcelFactory LayoutManufacturing Process ModelingProduction System Modeling
2 Days Ago
Easy Apply
Hybrid
Austin, TX, USA
Easy Apply
Senior level
Senior level
Computer Vision • Hardware • Machine Learning • Robotics • Software
Design, deploy, and sustain automated end-of-line and in-process test systems for robotic hand production. Develop Python-based test automation, calibration and verification workflows, fixtures, sensor rigs, and traceability systems. Diagnose mechanical, electrical, firmware, motor, actuator, and sensor issues using data-driven root-cause analysis. Define test strategies, pass/fail criteria, GR&R, and cycle-time targets, then hand off validated systems to production operators and technicians with documentation and training.
Top Skills: Actuator TestingAutomated Test SystemsCalibration SystemsData LoggingElectromechanical Test AutomationMotor TestingPythonRoboticsSensor TestingTraceability
5 Days Ago
In-Office
82K-123K Annually
Entry level
82K-123K Annually
Entry level
Aerospace • Artificial Intelligence • Machine Learning • Robotics • Software • Defense Technology
Supports manufacturing process development, tooling and fixture design, work instructions, prototype builds, NPI, production ramp-up, troubleshooting, CAPA, process validation, and continuous improvement for aerospace systems. Collaborates with design, production, quality, supply chain, and industrial engineering teams while using CAD and manufacturing documentation to improve safety, quality, throughput, and efficiency.
Top Skills: As9100CadCapaCatiaCreoErpGd&TLean ManufacturingMesPlmSiemens NxSix SigmaSolidworks

What you need to know about the Austin Tech Scene

Austin has a diverse and thriving tech ecosystem thanks to home-grown companies like Dell and major campuses for IBM, AMD and Apple. The state’s flagship university, the University of Texas at Austin, is known for its engineering school, and the city is known for its annual South by Southwest tech and media conference. Austin’s tech scene spans many verticals, but it’s particularly known for hardware, including semiconductors, as well as AI, biotechnology and cloud computing. And its food and music scene, low taxes and favorable climate has made the city a destination for tech workers from across the country.

Key Facts About Austin Tech

  • Number of Tech Workers: 180,500; 13.7% of overall workforce (2024 CompTIA survey)
  • Major Tech Employers: Dell, IBM, AMD, Apple, Alphabet
  • Key Industries: Artificial intelligence, hardware, cloud computing, software, healthtech
  • Funding Landscape: $4.5 billion in VC funding in 2024 (Pitchbook)
  • Notable Investors: Live Oak Ventures, Austin Ventures, Hinge Capital, Gigafund, KdT Ventures, Next Coast Ventures, Silverton Partners
  • Research Centers and Universities: University of Texas, Southwestern University, Texas State University, Center for Complex Quantum Systems, Oden Institute for Computational Engineering and Sciences, Texas Advanced Computing Center

Sign up now Access later

Create Free Account

Please log in or sign up to report this job.

Create Free Account